what to use as background in picture frames

Download Article

Download Article

Photographs provide us with a great fashion to preserve and display treasured memories, and framing pictures allows photographs to exist decorative, too. It's important to know the basic steps of how to frame a picture to go along your photographs protected and make your pictures wait great when they're on display. Below, you'll find out how to choose a pre-made frame, as well every bit how to mat and brand a basic wooden frame of your own. This is an easy project that can exist done in under an hour with the right tools. Just get started with Step 1 below!

1. 1

   Consider the pattern of your room. If the room looks mod, yous'll want to avert ornate, wooden frames. If the room is classic, you'll desire to avert sleek or brushed metallic, mod-looking frames. Of course, this rule tin exist broken in gild to make a design statement.

2. ii

   Consider the style of the pic. Older style pictures will mostly await more at home in older styled frames. You will also want to consider the color of your motion-picture show. If black and white, information technology will look better with a colored or black/white frame. If the picture has color, it can look amend with either color frames or wooden frames.

   Advertisement

3. 3

   Choose the frame mode. You'll have to make up one's mind if yous want a sparse frame, thick frame, shadow box frame, or other styled frame. Some pictures, such as printed canvases, might look better with no frame at all!

4. 4

   Choose the size relative to the room. Do you lot want the picture show to feature prominently in the room and take up a large amount of infinite or do you want to take it exist smaller and simply be a beautiful detail to the room? You lot'll have to decide what works better for your design.

5. five

   Choose the size relative to the picture. Think about how large the picture is going to be. At present, do you want there to be a lot of space between the movie itself and the frame? Or practise you desire there to be no infinite at all? 1-two" of mat (or infinite between the frame an pic) is normal, as is no mat whatsoever. However, you can make a dramatic statement by having a larger gap (iv-half-dozen" or more).

   • Of course, this is relative to the size of the motion picture. If the picture is enormous, a 4" mat might be very reasonable. Using an acid-free mat lath is recommended.

6. 6

   Choose your color. More often than not, black, white, and brownish are considered good neutral colors that volition by and large match with virtually pictures. You can also become with colors, however. This is an peculiarly good thought if you lot really desire to make a flick pop, and draw attending to it in the room.

   • By and large, y'all would cull a color by finding a highlight or significant colour in the picture and and so making the frame that color. For case, if your degree has a red seal, you lot might make that popular by having it framed in a matching cerise as well.

7. 7

   Consider using a mat. If you determine to have a gap between the frame and the moving-picture show, you'll demand a mat. This is a piece of paper, cardboard, or cardstock which creates a secondary "frame" for the flick. You lot'll need to decide what color you want your mat to be. Commonly, a white or cream color is used, but yous can likewise use more than brightly colored mats which compliment your picture show.

   Advertizing

1. 1

   Measure your mat. Take the measurement of your picture and add the width you lot want for your mat to get the mat size. Let's frame an imaginary 8x10 photo. For this photo, nosotros want a mat with a one.5" width. So the measurements for the mat become 11x13" (since the width needs to be added to each side).

2. ii

   Cut the outside border. Measure a foursquare corner, using a tool if yous accept ane, and then cut the mat to the desired measurement. Use a box cutter or other extremely sharp tool in order to get a make clean line. Our mat will exist 11x13" around the exterior.

3. 3

   Cutting the inside border. Cut the inside edge where you want the picture to go. The usual advice is to have the gap on the bottom marginally larger than the ane on peak (this should be almost ephemeral). Dry fit it to effigy out where you desire it and then measure and cut a pigsty in the center of the mat that fits the measurement of your image.

   • A good tip is to measure the exact shape, in this case the 8x10 rectangle, and then make the actual cuts but inside of the line yous drew. This style you won't accidentally end upwardly with gaps where you made the pigsty besides large.

4. 4

   Attach the moving-picture show. Fit the movie into the hole for the mat. Take two pieces of tape and utilize them to bridge the gap along the superlative line. These should exist evenly spaced, towards the center. Next, take two more pieces of tape and place these over the tiptop, mat-side of the first tape pieces. The long border of these pieces should follow the line of where the flick and mat come across.

   • This is a safe way to tape photos to mats, since the tap can just be cut where the picture and mat run into, leaving only minimal record on the picture itself.

   Advertising

1. 1

   Gather your materials. We're going to make a frame for our theoretical 8x10 photo with our 1.five" width mat. You lot'll need:

   • 1x2 lumber in a forest type of your choice
   • one/4" foursquare dowels in a matching or pleasantly contrasting woods of your choice
   • 5 mm diameter dowel rods
   • A miter box, saw, square mensurate, and measuring tape
   • Mucilage and rubber bands
   • Materials to brand a basic jig, such equally plywood.
   • Optional materials like paint or stain

2. 2

   Cutting the pieces to the desired lengths. For now only recollect about the 1x2s. The inside measurement of that portion of the frame volition be the aforementioned size as your mat, with the outside measurement adding the additional length for the miter. Cut the 1x2s to the size you'll need for the outside measurement of the frame. Once yous take your 1x2s cut, cutting your square dowels to the aforementioned measurement.

   • In our case, since the 1x2s are really 1.five" x .75", we need to add ane.five" to each end to get the outer edge measurement. And so the short side pieces volition so be 14" and the long side pieces will be 16".

3. 3

   Glue the ii sections together. Glue the square dowel to the 1x2, so that the faces are affluent.

4. iv

   Miter the ends. Using a box miter (or miter saw, if yous have 1), cut the ends of the iv pieces and so that they are at a 45 degree angle. The short terminate of each miter should be on the side with the square dowel. Sand any rough edges.

   • The measurement on i side of the short pieces should at present exist 14", with the other at eleven".
   • The measurement on one side of the long pieces should now exist 16", with the other side at 13".

5. 5

   Brand a simple jig. Set up out a plywood canvass. Measure out the outline of the 14x16" frame, also every bit the inside 11x13" shape. Nail pocket-size pieces of scrap wood at the center on both the within and outside lines, and so that the pieces of the frame can sit snugly between them with the mitered corners yet accessible. Gum the mitered edges and and so insert the pieces into the jig (careful non to mucilage them to the surface).

6. vi

   Drill and insert dowels. Using a drill, make airplane pilot holes and then drill a 5 mm pigsty for your dowels at each of the four corners. This should pass diagonally through the corner, passing at the halfway point along the mitered border. So, encompass your dowel in glue and fit it through the hole. There should be some extra sticking out on either side. Stretch rubber band around the dowel ends on contrary sides of the frame to agree it together and then remove it from the jig. Permit the glue to dry out.

7. 7

   Sand and add together finishing touches. Score and snap off the extra dowel ends and then sand it down until it'south smoothen. Yous can at present paint or stain your picture frame.

8. 8

   Cut glass or plastic. You lot tin can become glass custom cut to the measurement of the larger foursquare (so that it nestles in the recess created past the square dowels). Yous can also buy articulate acrylic and cutting it to size (score on one side and and then snap). Place the plastic into the recess, followed by your mat and moving-picture show. A bankroll tin be added or you tin can use nails or clips to agree the picture and glass in identify.

   Advertisement

Add New Question

• Question

  How do I choose a frame for my art?

  

  Peter Salerno is the owner of Hook it Upwardly Installation, a professional person installation company, which has been hanging fine art and other objects around Chicago, Illinois for over 10 years. Peter also has over 20 years of experience installing art and other mountable objects in residential, commercial, healthcare and hospitality contexts.

  

  Installation Good

  Expert Answer

  Friction match the frame to the picture for long-lasting appeal. Yous should choose a frame that's going to accentuate the image, rather than picking something because it goes with the residuum of your décor. Yous might change your furniture or paint your walls, but you're probably going to have this slice of fine art for the rest of your life.

• Question

  If I desire to frame a x x 13 motion picture with a white groundwork, is information technology still necessary to add a mat?

  

  No, it's not necessary to add a mat, but it might still be a good choice.

• Question

  Is picture framing useful? Tin't I but use blu-tac to stick my photo to the wall?

  

  Yes, you could, simply many people find frames to be more aesthetically pleasing. You certainly don't have to employ i if you don't want to.

• Question

  If I am framing a 16 10 20 picture with a 1 1/ii inch matte, what size frame do I need?

  

  19 x 23 if yous're using the entire pic. Put the matte over the picture and measure it.

• Question

  I'1000 upcycling a picture frame. The clips I usually undo (a type to concur the flick in) unremarkably stay in place but these clips have come out and I cannot get them dorsum in. What is the difference?

  

  Noodle_knows_it23

  Community Answer

  If the picture volition non stay in, apply tape to stick it on to the edges instead.

Ask a Question

200 characters left

Include your electronic mail address to get a message when this question is answered.

Submit

Advertisement

• Consult with a local framing company if you don't know how to cull a frame.

Advertisement

• If your picture is special to y'all, you may want to get special glass that will protect the picture show from sunlight. Over time, the sunlight may fade the pic.

Advertizement

About This Commodity

Article Summary X

To frame a picture, get with a frame that matches the type of moving-picture show you lot're framing. For example, you might opt for a black frame to complement a blackness-and-white picture show, or a wooden frame for a colored photo. Also, choose a large frame if yous desire the photo to stand up out, or a smaller frame if yous want the motion-picture show to be more subtle. If you lot want there to be a space between the frame and the flick itself, mount the motion-picture show on a mat fabricated of paper or cardstock. For tips on how to make your ain picture frame, read on!

Did this summary aid you lot?

Thanks to all authors for creating a folio that has been read 154,917 times.

Did this article help you?

talleytrainsomill.blogspot.com

Source: https://www.wikihow.com/Frame-a-Picture

Share this post